Android Setup“FireText Droid Connector” supports most Android OS Phones.

1Download and install the latest FireText Software.

2From the Android App Market, download the FireText Droid Connector App

3Start FireTextDroid after installed

4Make note of the IP address returned by the App

5Hit next and FireTextDroid will be waiting for incoming connections (only first conection is accepted)

6Your Android phone does not need the usb cable to be connected! Make sure you are running via wifi not 3G as most carriers don't allow the 3G connection

7Goto Preferences / Device within the FireText Administrator Software

8Choose ANDROID connection from the Device Type Box, set the same IP address on the primary address field that you made note of in step 4 from the FireTextDroid application

9Choose Apply then OK

10At the main screen choose FILE/START and the device should be online at the bottom of the screen!

Motorola Preferences Settings

Device Type: GSM PDU Modem/Phone
Enable Debug Modem Device: CHECKKED
Device Preferences: Set your COM Port
Storage: AUTO
Leave all other settings as Default

Multimodem Preferences SettingsDevice Type: GSM PDU Modem/Phone
Device Preferences: Set your COM Port
SMS Centre: CHECKED, within the Box add your SMS Centre #, You can find your SMS # by choosing TEST Current Port and within the Device Window Log, you will see "AT+CSCA?+CSCA: "010438000006106",129".... 010438000006106 would be your number that you would enter in this box.
Baudrate: 115200
Databits: 8
Handshake: Combined
Parity: None
Stopbits: One
Storage: SM

Nokia Preferences Settings

Device Parameters
Port: Choose NOKIA from your drop down selection.
All other settings will be greyed out.